STAINLESS STEEL SUBMERSIBLE PUMPS AND DEWATERING PUMPS


FRS-Series Utility Pump
Feature
  • unique and compact design to pump liquids down to the floor level.
  • stainless steel motor casing with SS410 heat trated shaft and double mechanical seal
  • CI pump casing with dynamically balanced impeller, free from vibration for long and quiet operation
  • energy saving dry type motor with thermal protector
  • completely sealed water resistant cable entry and waterproof joints
  • lubricated-for-life and maintanance free bearings
  • automatic water level control and glide rail fitting available on request

    • Application
  • removal of sewage or residue water, dewateriing of construction sites, draingae of flat surfaces on rooftops, utility pits, industrial waste
    • Type Outlet
    (inch)    		 HP Voltage Nor.Head
    (m)    		 Nor.Capacity
    (l/min)    		 Max.Head
    (m)    		 Max.Capacity
    (l/min)    		 Solid Pass
    (mm)    		 Weight
    (Kgs)
    FRS 400 1 0.5 220V 7 80 11 130 0 15.5
    FRS 400 2 0.5 220V 7 140 11 240 0 15.5


    FSS-Series Utility Pump
    		Feature
  • integrated stainless steel motor and pump casing with heat treated SS410 shaft and double mechanical seal
  • dry type motor with thermal and over current protector
  • rigid stainless steel casting impeller for higher abrasion and corrosion resistance
  • compact design and light weight for easy portability
  • automatic water level control available on request

    • Application
  • sea water transffer, irrigation, food and beverage processing,chemical transffer, drainage of contaminated water, chemicals, dewatering constructiin sites and civil engineering projects etc..
    • Type Outlet
    (inch)    		 HP Voltage Nor.Head
    (m)    		 Nor.Capacity
    (l/min)    		 Max.Head
    (m)    		 Max.Capacity
    (l/min)    		 Solid Pass
    (mm)    		 Weight
    (Kgs)
    FSS 250 1.5 0.33 220V 6 100 8.5 200 6 12
    FSS 400 2 0.5 220V 7 140 11 240 6 12
    FSS 750 2 1 220V 10 200 15 320 8 15


    FS-Series Utility Pump


    		Feature
  • compact design, high performance and exceptional durability for handling abrasive liquids
  • integrated stainless steel outer casing,motor casing and strainer
  • heat treated SS410 shaft with double mechanical seal
  • dynamically balanced ductile iron/chrome steel impeller
  • dry type motor with thermal and over-current protector
  • lubricated-for-life and maintanance free bearings
  • fine casting discharge outlet and top cover for models above FS215
  • automatic water level control available on request


    • Application
  • waste water from houses industries and small municipalities
  • irrigation and light effluent
  • drainage of contaminated water
  • dewatering construction sites and civil engineering projects
  • dewatering subways, tunnels, dams etc..
    • Type Outlet
    (inch)    		 HP Voltage Nor.Head
    (m)    		 Nor.Capacity
    (l/min)    		 Max.Head
    (m)    		 Max.Capacity
    (l/min)    		 Solid Pass
    (mm)    		 Weight
    (Kgs)
    FS 250 1.5 0.3 220V 6 100 8.5 200 6 12
    FS 400 2 0.5 220V/440V 7 140 11 240 6 12
    FS 750 2 1 220V/440V 10 200 15 320 8 15
    FS 215 2 2 220V 15 250 22 450 9 34
    FS 315 3 2 220V 8 500 16 650 9 34
    FS 222 2 3 220V 20 300 27 500 9 36
    FS 322 3 3 220V 10 600 20 800 9 36
    FS 237 2 5 220V/440V 30 200 36 500 11 45
    FS 337 3 5 220V/440V 20 500 30 900 11 45
    FS 437 4 5 220V/440V 10 1000 18 1500 11 45
    FS 355 3 7.5 220V/440V 25 600 32 1200 11 50
    FS 455 4 7.5 220V/440V 15 1000 22 1700 11 50
    FS 475 4 10 440V 30 800 42 1600 15 86
    FS 675 6 10 440V 15 1600 31 2200 15 86
    FS 4110 4 15 440V 35 1000 51 1700 15 93
    FS 6110 6 15 440V 20 1700 32 2500 15 93