Drum & Container Pumps

NBL-STANDARD DRUM & CONTAINER PUMPS


Modular Design allows quick and easy interchanging of all motors and pump ends. Highest Quality Shaft Material Hastelloy® C-276 (PP, PVDF units) SS-316 (SS units) Finned TFE® Guide Sleeve is secured inside inner tube, ensuring stability and proper alignment. [A] Threaded Design maintenance is simplified w/o special tools allows quick replacement of rotor & pump housing ensures proper alignment of replacement components		[B] Easy-to-use Handwheel secures motor to pump end ensures proper coupling seatings safe handle for removal and transportation [C] Threaded Hose Coupling for safe and efficient hose removal. [D] Thick Wall Construction adds durability and prevents damage. [E] Pure Carbon 6038C® for the most chemically-resistant carbon bearing available.

MOTOR OPTIONS	PUMP OPTIONS
SP-280P (Electric Motor - Open Drip Proof)	PP (Polypropylene - 27", 39", 47", 60", 72")
SP-ENC (Electric Motor - TEFC)	PVDF (PVDF - 27", 39", 47", 60", 72")
SP-A1 (Pnuematic Motor)	SS (Stainless Steel - 27", 39", 47", 60", 72")
SP-A2 (Pnuematic Motor)

Note: ONE PUMP SET COMPRISES OF ANY ONE OF THE ABOVE MOTOR OPTIONS ALONG WITH ANY ONE OF THE ABOVE PUMP OPTIONS

SP-280P (Electric Motor - Open Drip Proof)

115V/1/60 -- 825 WATTS (1.11 hp)
220V/1/50 -- 825 WATTS (1.11 hp) CE

Thermally protected. Manual reset for safety. Drop in cartridge brush system. Yellow Valox housing for chemical resistance. 115V Models - 16 ft. (5m) of SJT3 wire cord with molded plug. 220V Models - IP-44 enclosure, CE listed, Har Ho7 cable, 5 M harmonized cord w/o plug.

Weight: 7.5 lbs. (3.4 kg)
NOT SUITABLE FOR FLAMMABLES.

SP-ENC (Electric Motor - TEFC)

115V/1/60 -- 825 WATTS (1.11 hp)
220V/1/50 -- 825 WATTS (1.11 hp) CE

Thermally protected. Manual reset for safety. Drop in cartridge brush system. anodized housing for use in highly corrosive applications or where high levels of fumes are present. 115V models - 16 ft (5m) of SJT3 wire cord with molded plug. 220V models - IP-54 enclosure, CE listed, Har Ho7 cable, 5 M harmonized cord w/o plug.

Weight: 9.0 lbs. (4 kg.)
NOT SUITABLE FOR FLAMMABLES.
SP-A1 (Pnuematic Motor)

Maximum inlet pressure = 100psi (6.8 bar). Air consumption 22 CFM @ 92 psi (10.38 liter/sec @ 6.3 bar). Air connection 1/8” (3mm). Air line filter, pressure regulator and automatic oiler recommended. External muffler. NOTE: Flow rates are registered under a 1” (25.4mm) hose barb restriction.

Weight: 2.5 lbs. (1kg)
RPM: 7500

SP-A2 (Pnuematic Motor)

Maximum inlet pressure = 100psi (6.8 bar). Air consumption 28 CFM @ 90 psi (13.2 liter/sec. @ 6.2 bar). Air line filter, pressure regulator and automatic oiler recommended. External muffler. Plastisol coated handle for operator comfort and safety. NOTE: Flow rates are registered under a 1” (25.4mm) hose barb restriction.

Weight: 3 lbs. (1.3 kg) RPM: 8000

DRUM & CONTAINER PUMP ENDS

Pump ends are designed with threaded joints for easy maintenance and individual component replacement, without special tools. Our guide sleeves are TFE®, with a specially extruded fin which secures it inside the inner tube. We utilize a seal grade carbon for our lower bushing (Pure Carbon® 6038C), the most chemically resistant carbon available. Our shafts are SS-316 (SS ends) and Hastelloy® C-276 (PP, PVDF). Materials of construction include non-glass filled PP, natural PVDF and SS-316. These high quality materials and state of the art techniques ensure that we are THE STANDARD IN CHEMICAL TRANSFER.
PP (Polypropylene - 27", 39", 47", 60", 72")

PP
for carboys:
High volume pump SP-PP-27" (700mm)
High head pump SP-PP-HH-27" (700mm)
for 55 gal. (200 l. drums):
High volume pump SP-PP-39" (1000mm)
High head pump SP-PP-HH-39" (1000mm)
for tanks:
High volume pump SP-PP-47" (1200mm)
High head pump SP-PP-HH-47" (1200mm)
for IBC's:
High volume pump SP-PP-60" (1500mm)
High head pump SP-PP-HH-60" (1500mm)
for large storage vessels:
High volume pump SP-PP-72" (1800mm)
High head pump SP-PP-HH-72"(1800mm)

APPLICATIONS
Acids and alkalies. Acetic acid, Ammonium Hydroxide, Ferric Chloride,
Fluosilic Acid, Phosphoric Acid (45%), Nitric Acid (20%), Sodium Hydroxide,
Sulfuric Acid (75%) and many other liquids.

PVDF (PVDF - 27", 39", 47", 60", 72")

PVDF
for carboys:
High volume pump SP-PVDF-27" (700mm)
High head pump SP-PVDF-HH-27" (700mm)
for 55 gal. (200 l.) drums:
High volume pump SP-PVDF-39" (1000mm)
High head pump SP-PVDF-HH-39" (1000mm)
for tanks:
High volume pump SP-PVDF-47" (1200mm)
High head pump SP-PVDF-HH-47" (1200mm)

APPLICATIONS
Highly corrosive and fuming materials. Hydrofluoric Acid (concentrated cold), Nitric Acid (concentrated), Propionic Acid, Stearic Acid, Sulfuric Acid (66 Baume) and many other liquids.

SS(Stainless Steel - 27", 39", 47", 60", 72")

SS
for carboys:
High volume pump SP-SS-27" (700mm)
for 55 gal. (200 l.) drums:
High volume pump SP-SS-39" (1000mm)
for tanks:
High volume pump SP-SS-47" (1200mm)
for IBC's:
High volume pump SP-SS-60" (1500mm)
for large storage vessels:
High volume pump SP-SS-72" (1800mm)

APPLICATIONS
Flammable or combustible materials. Diesel, gas, oils, solvents, alcohols. See our compatibility chart for other liquids.