|
|
|
|
Hose
Pipes: |
|
|
NIE
manufactures a wide range of rubber hoses for steam, air, gas, water,
petroleum, oil, acids, chemicals, other liquids and solids and caters to
various industries like petrochemicals, chemicals, oil refineries, cement,
steel, mining, food, automotive, railways, defence, aviation, aerospace,
construction, shipping etc.
The
hoses are constructed using specially blended synthetic polymer for the
tubes and weather, heat and abrasion resistant synthetic polymer for
the cover. The hoses are reinforced with fabric with/without
helical wire. Hoses can be supplied with built-in nipples, flanges and
other end-fittings.
|
|
|
|
|
|
|
Oil
Suction and Discharge Hoses
|
| Specifications |
: BS 1435, BS 3492,
IS 8189 and IS 10733. |
| Applications |
: For Suction and
discharge of fuel, oils, gasoline, diesel oil, crude oil, etc. |
| Dimensions |
: Diameter 37 mm to
250 mm; Length upto 15m. Available in smooth bore/rough bore. |
|
|
|
|
|
|
|
Steam Hoses
|
| Specifications |
:
For steam and high
temperature fluids in refineries, petrochemical, fertilizer,
paper,
steel plants, etc. |
| Applications |
:
BS 924, BS 796 Type L&M |
| Dimensions |
:
Diameter 37 mm to 250 mm;
Length upto 15 m. Available in smooth bore/rough bore. |
|
|
|
|
|
|
|
Chemical/ Acid
Resistant Suction/Delivery
Hoses
|
| Specifications |
: BS 926 Type E. |
| Applications |
: For suction and discharge of acids,
alkalies,
solutions of inorganic salts,
chemical products, etc, in
chemical plants and vehicles. |
| Dimensions |
: ID 20 mm to 120 mm; Length upto 18 m for Delivery
Hoses .
ID 25 mm to 200 mm; Length upto 15m for Suction and Discharge
Hoses.
Also available with built -in-rubber flanges. |
|
|
|
|
|
|
|
Pneumatic/Air/Rock
Drill Hoses
|
| Specifications |
:
IS 446, IS 911. |
| Applications |
:
Rock drilling-mines, tunnels, quarries,
construction, etc. Air hoses for use
with compressors in engineering industry for WP of
upto 14 kg/Cm2 |
| Dimensions |
:
ID 12.5 mm to50 mm; Length upto 18m. |
|
|
|
|
|
|
|
Sand/Shot Blast
Hoses
|
| Specifications |
: BS 924 Part 9 Type K, Is 5894 Type I
& II. |
| Applications |
: High abrasion resistant polymer is
used for lining and the hoses are used for sand/
shot blasting
purposes, (cleaning metal surfaces, smoothening metal castings). |
| Dimensions |
: ID 12.5 mm to 50 mm; Length upto 18
m. |
|
|
|
|
|
|
|
Water Delivery
Hoses
|
| Specifications |
: IS 444, IS 912, IS 913, IS 914. |
| Applications |
: RP's Deluxe Water Delivery Hose is
useful for service of construction sites
mines, mills, etc. Also
for gardening and domestic use. |
| Dimensions |
: ID 12.5 mm to 150 mm. Length upto
18m.
Both plain and outside armoured hoses are available. |
|
|
|
|
|
|
|
Water Suction
Hoses
|
| Specifications |
: IS 2482, IS 2410, IS 3549. |
| Applications |
: Agriculture, construction
industries, ships and also for dewatering of pits and mines. |
| Dimensions |
: ID 25 mm to 450 mm;
Length upto 18 m.
Both plain and armoured. Available in rough bore of smooth bore
with/without
end connections. |
|
|
|
|
|
|
|
Cement Grouting
Hoses
|
|
Applications |
: Cement grouting at construction site,
transporting dry/wet concrete mixtures,
irrigation projects
etc. |
| Dimensions |
: ID 50 mm to 250 mm; Length upto 18 m. |
|
|
|
|
|
|
|
Slurry Hoses
|
|
Applications |
: Mining, Cement Quarrying Industries |
| Dimensions |
: ID 100mm to 300 mm; Length upto 9 m. |
|
|
|
|
|
|
|
Asbestos
Covered Hoses/Furnace
Cooling/Copper Cable Sheeting Hoses
|
|
Applications |
: Used as Induction Hoses for
furnace
cooling and copper cable sheeting in oil industries,
coal/lignite units, induction furnaces. |
| Dimensions |
: ID 100mm to 300 mm; Length upto 9 m. |
|
|
|
|
|
|
|
Rail
/ Lorry Hoses
|
|
Applications |
:
For conveying fluids from rail
wagons/lorries etc. |
| Dimensions |
:
ID 38 mm to 75 mm; Length upto 18m. |
|
|
|
|
|
|
|
Tanker Discharge
Hoses
|
|
Applications |
:
For carrying oil from steamers to the shore. |
| Dimensions |
:
ID 100 mm to 250 mm; Length upto 9 m |
|
|
|
|
|
|
|
Vacuum Brake
Hoses/Air Brake Hoses
|
| Applications |
: Manufactured as per Railway
specifications for connecting the brake system of railway
wagons. |
|
|
|
|
|
|
|
Viton/Silicone
Hoses
|
| Applications |
: For high temperature applications. |
|
|
|
|
|
|
|
Brewery/Dairy/Food
Grade Hoses (Non-Toxic)
|
| Applications |
: Specially for handling food grade
materials like milk, dairy products, vegetable oils, alcoholic
and soft beverages. |
| Dimensions |
: ID 25 mm to 100mm; Length upto 18m |
|
|
|
|
|
|
|
Petrol Dispensing
Hoses
|
| Applications |
: For dispensing petrol/diesel at petrol pumps. |
| Dimensions |
: ID 20 mm to 31.5 mm; Length upto 16m. |
|
|
|
|
|
|
|
|
|
UP
|
|
|
|
|
