For use under
most climatic conditions. This are Weatherproof and may be used in
the corrosive conditions when protected by the shroud.
Specification
Gland consist of
checknut 1, gland body 2, metal washers (3 Nos) 3, outer
seal rubber ring 4, compression nut 5. All metal parts are made of
rass accurately machined for ease of assembly.
Extras
Shrouds and
Earth tags are supplied separately and should be specified when
ordering the gland.
Fitting
sequence:
a)
Screw item 2 into apparatus (secure with item 1 if plain hole
entry)
b)
Pass item 5, item 3 and item 4 over cable before
commencing to strip oversheath.
c)
Remove the outer sheath to the desired length depending
on the length of leads required.
d)
Pass item 3 over the cable and splay out the armour wire one
by one and then cut the armour wires according to the size of
washer. Insert the third metal washer over inner sheath of
cable so that bend armour are secured between the two metal
washers.
e)
Push the cable through item 2 and engage the item 5 with item
2 and tighten up while doing, so the grooved rubber ring will
contract in radial direction and will grip the outer sheath
of cable.