NBL - AKAY

CHEMICAL PROCESS PUMPS - CHP ST

Mfrg Std- ANSI B 73.1
Type- End Suction - Back Pullout
Impeller- Fully open with partial shrouds
Capacity- upto 80 m3/hr
Head- Upto 60 mts
Temperature- 210oC to 260oC
Working Pr.- upto 2550 kPa

Features
  1. Maximum Interchangability, gives minimum spare parts inventory.
  2. Greater quality control & accuracy in
    3. production of every pump with the modern machining opration.
  3. Back-Pull-Out design, permits quick inspection or repairs of roating
    4. elements without disturbing electrical and piping connections.
  4. Simple External Axial Adjustment for impeller wear.
  5. Exclusive balanced Thrust.
  6. Standard Dimensions, cut layout design cost.
  7. Standard foundations,save installation drawing time,talent and money.
  8. Fully open impeller with back pump-out vanes, smoothly contou"#e0386c" face="comic sans ms" for efficient slurry and solids handling and to meet low NPSH requirements.
Applications
  1. Water Pumping
  2. Air Conditioning
  3. Brine Solutions
  4. Chemicals
  5. High Temperature Liquids(upto 260oC)
  6. Low specific gravity hydro liquids
  1. High viscous & high freezing point fluids
  2. Corrosive acids
  3. Caustic services
  4. Slurries
  5. Outdoor & Indoor services
  6. Continuous & Intermittent services
CHEMICAL PROCESS PUMPS - CHP MT

Mfrg Std- ANSI B 73.1
Type- End Suction - Back Pullout
Impeller- Fully open with partial shrouds
Capacity- upto 350 m3/hr
Head- Upto 150 mts
Temperature- 210oC to 260oC
Working Pr.- upto 2550 kPa

Features
  1. Maximum Interchangability, gives minimum spare parts inventory.
  2. Greater quality control & accuracy in
    3. production of every pump with the modern machining opration.
  3. Back-Pull-Out design, permits quick inspection or repairs of roating
    4. elements without disturbing electrical and piping connections.
  4. Simple External Axial Adjustment for impeller wear.
  5. Exclusive balanced Thrust.
  6. Standard Dimensions, cut layout design cost.
  7. Standard foundations,save installation drawing time,talent and money.
  8. Fully open impeller with back pump-out vanes, smoothly contouredfor efficient slurry and solids handling and to meet low NPSH requirements.

Applications
  1. Water Pumping
  2. Air Conditioning
  3. Brine Solutions
  4. Chemicals
  5. High Temperature Liquids(upto 260oC)
  6. Low specific gravity hydro liquids
  1. High viscous & high freezing point fluids
  2. Corrosive acids
  3. Caustic services
  4. Slurries
  5. Outdoor & Indoor services
  6. Continuous & Intermittent services
    7.

Composite Performance Curves



CHP-LT CHEMICAL PROCESS PUMPS



Mfrg Std- ANSI B 73.1
Type- End Suction - Back Pullout
Impeller- Fully open with partial shrouds
Capacity-to 350m3/h
Head-to 150 m
Temperature-210oC to 260oC
Working Pr.-to 2550 kPa

Features
  1. Maximum Interchangability, gives minimum spare parts inventory.
  2. Greater quality control & accuracy in production of every pump with the
    3. modern machining opration.
  3. Back-Pull-Out design, permits quick inspection or repairs of roating elements without disturbing electrical and piping connections.
  4. Simple External Axial Adjustment for impeller wear.
  5. Exclusive balanced Thrust.
  6. Standard Dimensions, cut layout design cost.
  7. Standard foundations,save installation drawing time,talent and money.
  8. Fully open impeller with back pump-out vanes, smoothly contou"#e0386c" face="comic sans ms" for efficient slurry and solids handling and to meet low NPSH requirements.

Applications
  1. Water Pumping
  2. Air Conditioning
  3. Brine Solutions
  4. Chemicals
  5. High Temperature Liquids(upto 260oC)
  6. Low specific gravity hydro liquids
  1. High viscous & high freezing point fluids
  2. Corrosive acids
  3. Caustic services
  4. Slurries
  5. Outdoor & Indoor services
  6. Continuous & Intermittent services
    7.
Composite Performance Curves



HIGH TEMPERATURE,HIGH PRESSURE PROCESS PUMPS - TYPE HTP

Mfrg Std- API Design
Type- End Suction - Back Pullout
Impeller- Closed Impeller design
Capacity- upto 1000 m3/hr
Head- Upto 230 mts
Temperature- 200oC to 420oC
Working Pr.- upto 4200 kPa

Features
  1. Maximum Interchangability, gives minimum spare parts inventory.
  2. >Greater quality control & accuracy in production of every pump with the modern machining opration.
  3. Back-Pull-Out design, permits quick inspection or repairs of rotating elements without disturbing electrical and piping connections.
  4. Simple External Axial Adjustment for impeller wear.
  5. Exclusive balanced Thrust.
  6. Standard Dimensions, cut layout design cost.
  7. Standard foundations,save installation drawing time,talent and money.
  8. Unique impeller design with smoothly controlled inlet passages "#e0386c" face="comic sans ms"uce turbulance and provide lowest NPSH requirements.

Applications
  1. Hot oil
  2. High pressure requirements
  3. Chemicals
  4. High temperature Liquids(upto 400oC)
  5. Low specific gravity hydrocarbons
    6.

Composite Performance Curves