|
FEATURES
1. Energy
Saving:
SA series motors are energy efficient and ideally
suited for power intensive, process and other industries.
2. High
Torque:
SA series cage motors have high staring and pullout
torques and accelerate the load quickly.
3. Low
Noise Levels:
SA series motors have noise levels with 85dB(A) at 1
meter and conform to IS:12065.
4. Low
Vibration Levels:
SA series motors conform to IS:12075 for vibration
level.
5. Stator:
The
cast iron stator body is robust and shock resistant. The stator is
generally wound with enamelled copper
wire / strip with class "F" insulation and windings are braced to prevent coil deformation due to stress caused
by surges.
6. Rotor:
The die-cast aluminum rotor is designed to withstand the server
forces encouraged during starting. Special
copper brazed rotors are provided for high
speed applications. The rotor are core is keyed on a steel shaft
and retained by means of rigid
rotor end plates. Each rotor is dynamically balanced.
7.
Core:
The
core is made from low loss, high permeability, varnish insulated
electrical grade sheet steel. Stampings
are hydraulically pressed, then clamped to form a
rigid structure.
8. Treatment:
Wound
stators and rotors are impregnated using polyester resin varnish
having class "F" thermal
-capability. Polyurethene paint is made as a standard
in a conveyorised painting plant. Other possible on request.
9. Shaft:
Shafts
are made from high carbon steel of cross section adequate enough to
provide strength and rigidity
to minimise the deflection and vibrations.
10.
Bearings:
Grease
lubricated antifriction bearings of same size are used at DE and NDE
and can be interchanged if called
for. Bearings have 90% survival life of a
minimum of 40,000 working hours for drive transmission direct
through flexible coupling.
11.End-Shields:
End-shields on
DE and NDE are
identical and can be interchanged, if called for, minimizing the users inventory.
12.Terminal
Box:
Terminal
box with improved aesthetics is offered as standard execution. Cable
terminations are
housed in a terminal box of adequate proportion having sufficient
electrical clearances. The terminal
box is effectively boxes are provided with conduit entry as a
standard practice. Compression glands
can be provided upon request at extra cost. Terminal boxes for frame
sizes 250 and above are tested
for through fault level of 43.7 kA for 0.25
secs.
13.Brush Gear:
The
brush gear is rated for continuous duty and is of constant pressure
type.
14.Inverter
Application:
SA series cage motors are suitable for power intensive and process
industries where in these motors
are generally powered through inverters. These motors when
powered through inverters gives the desired
speed variation as demanded by the process,
besides giving the benefit of conservation of energy to the user.
In the event of ventilations circuit failure
or for certain applications calling for totally enclosed non-ventilated
surface cooled (IC410) motors, Spectrum
series motors can deliver about 60 to 70% of rated power output.
APPLICATIONS:
SA motors are ideal for various industrial applications like
Pumps, Compressors, Fans, Crushers Mills.
Conveyors and are best
suited for industrial environment conditions.
SPECIFICATION:
SA motors are rated for continuous
duty (S1), Altitudes up to 1000m and ambient temperature up to
50°C.
Motors are suitable for 415 V ± 10%, 50 Hz ± 5% and
combined variation of ± 10%, 3 phase supply with
IP22 protection, Insulation class "F" and
temperature rise to class "B". We can also supply
motors with
IC01/IP55 protection, voltage 220/380,440/460/660V
and frequency 25/50/60/ Hz.
|
